Ready mixed solar fluid Supplied in easy to handle 10l glycol containers. These are ideally suited to servicing or commissioning thermal high pressure heating systems. Ready mixed solar fluid make the commissioning of any system simple and quick, as there is no need for testing to make sure the fluids are within workable refractometer tolerance. In the summer if the solar heating fluids are too week then the fluids will boil inside the pipe work which will uncontrollably increase temperatures. With a subsequent reverse situation in winter, solar fluids if too week in concentrate will not perform well in lower temperatures and possibly freeze. The simple answer is to drain your existing fluid into a suitable container and replace with our ready mixed thermal heating fluid every year as an annual service program. Solar hot water fluids may contain contaminants due to stagnation. In any event the old solar heating fluids should only be handled using suitable work wear. Therefore it is very important to dispose of old glycol fluids in a safe and proper manner. Parts in this solar heating group: Solar tube connectors DN12 Solar tube connectors DN16 Solar tube brackets Solar fluid Solar flexible tube connection set Solar C clips Solar fiber washers Solar pump station connectors Solar tube lead slate Pressure relief valve DZR compression tube straight connector DZR compression elbow connector Compression tube insert DN12 or DN16 DZR compression tube to fiber washer flat face connector DN16 x 22mm male adaptor Temperature sensor cable outside Temperature sensor cable inside Immersion heater switch
