-Easy-access door for fast battery changes without breaking the calibration seal -Analog bar graph for fast changing or unstable signals -Large digit display with bright, two-level backlight for easier reading in low light -Touch Hold keeps readings on display even after removing probes The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding. Built to highest safety standards All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made. Removable holster with built in test lead and probe storage for convenience The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks. Additional measurement features The Fluke 87V is designed and built in the U.S. and comes with a lifetime warranty. Specifications: Fluke 87V Industrial Multimeter Specifications Voltage DC Maximum voltage 1000 V Accuracy ±(0.05% 1) Maximum resolution 10 µV Voltage AC Maximum voltage 1000 V Accuracy ±(0.7% 2) True RMS AC bandwidth 20 kHz with low pass filter; 3 dB @ 1 kHz Maximum resolution 0.1 mV Current DC Maximum amps 10 A (20 A for 30 seconds maximum) Amps accuracy ±(0.2% 2) Maximum resolution 0.01 µA Current AC Maximum amps 10 A (20 A for 30 seconds maximum) Amps accuracy ±(1.0% 2) True RMS Maximum resolution 0.1 µA Resistance Maximum resistance 50 MΩ Accuracy ±(0.2% 1) Maximum resolution 0.1 Ω Capacitance Maximum capacitance 9,999 µF accuracy ±(1% 2) Maximum resolution 0.01 nF Frequency Maximum frequency 200 kHz Accuracy ±(0.005% 1) Maximum resolution 0.01 Hz Duty cycle Maximum duty cycle 99.9% Accuracy ±(0.2% per kHz 0.1%) Maximum resolution 0.1% Temperature measurement –200.0 °C – 1090 °C –328.0 °F – 1994.0 °F excluding probe 80 BK temperature probe –40.0 °C – 260 °C –40.0 °F – 500 °F, 2.2 °C or 2% whichever is greater Conductance Maximum conductance 60.00 nS Accuracy ±(1.0% 10) Maximum resolution 0.01 nS Diode Range 3 V Resolution 1 mV Accuracy ±(2% 1) Duty cycle range Accuracy Within ±(0.2% per kHz 0.1%) Environmental Specifications Operating temperature –20 °C to 55 °C Storage temperature –40 °C to 60 °C Humidity (without condensation) 0% – 90% (0 °C – 35 °C) 0% – 70% (35 °C – 55 °C) Operating Altitude 2000 m Safety Specifications Overvoltage category EN 61010–1 to 1000 V CAT III, 600V CAT IV Agency approvals CE, CSA, RCM Mechanical and General Specifications Size 201 x 98 x 52 mm (with holster) Weight 355 g 624 g – with holster Display Digital 6000 counts updates 4/sec. 19,999 counts in high–resolution mode Analog 32 segments, updates 40/sec Frequency 19,999 counts, updates 3/sec at > 10 Hz Warranty Lifetime Battery Life Alkaline ~400 hours typical, without backlight Shock 1 Meter drop per IEC 61010–1:2001 Vibration Per MIL–PRF–28800 for a Class 2 instrument
